FUSION-5 | 3G/4G 5-Bands Cell Phone Signal Booster for Building

65dB (Cellular/ PCS/ AT&T LTE/ Verizon LTE/ T-Mobile AWS) | Boost signal for in-building up to 10,000 sq. ft. [ USA Product Only ]

  • Patent pending
  • Multiple application possibilities with 9-20V
  • Automatic Shutdown
  • Supports all 2G - 4G standards and all carrier frequencies (Except WiMax and iDen)
  • Supports 5-10 simultaneous users
  • Uplink/Downlink Oscillation Detection
The SureCall Fusion-5 (Model No. CM-Fusion-5) is the first five-band cell phone signal booster designed as a cost-effective all-in-one cellphone reception solution for mid-sized home to small businesses. It combines PCS and Cellular dual-bands with LTE and AWS frequencies for Verizon, AT&T and T-Mobile as a total cellular amplification solution. 
This full-featured signal booster/amplifier includes automatic shutdown for maximum flexibility. Extremely competitively priced, it requires 1/5th the space requirements of its competitors and is a fraction of the cost compared to similar amplifiers with its capabilities. Ideal for locations with a low cell phone data and voice signal. Covers up to 10,000 square feet and supports 5-10 simultaneous users.
Package Includes:

• Fusion-5 cell phone amplifier                                                                                                                                              

• 5dB attenuator                                                                                                                                                  

• 10dB attenuator                                                                                                     

• AC power supply                                                                                                                                                       

• User manual                                                                                                                                                               

• Mounting kit


*Outdoor and indoor antennas and cables are required for installation (purchased separately).
Frequency Uplink: 1850-1910/824-849/698-716/776-787/1710-1755 Downlink: 1930-1990/869-894/728-746/746-757/2110-2155
Input Impedance 50 ohm
Average Gain 65dB
Maximum Gain 70dB
VSWR ≤2:0
Standard Supported CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, LTE and all other standard cell phone networks
AC Power Transformer Input AC10V,60Hz; Output DC9-20V
DC Power 9V
Maximum RF Output Power 3 Watts EIRP
Noise Figure 6dB
Cable LMR400 or CM400 recommended
RF connectors N Female Connectors on both ends
Power Consumption <25W
Dimensions 10.75" x 9" 2.25"
Weight 10.5 lbs
Note: Our boosters and amplifiers cannot transmit cell signals without an outside and inside antenna connected by a cable.
We strongly recommend these antennas and cables as accessories for our boosters and amplifiers.
However, the number of antennas, length of cable, or connectors needed can vary according to the size and make of the structure, lack of signal strength, or where the structure resides. Or you can contact us or our reseller to find out what you need.


Full Band Outside Fiber Antenna


Full Band Inside Dome Antenna


 Ultra-Low-Loss Coaxial Cable  



  Full Band 2,3 or 4 Way Splitters   

The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower through the outside antenna.

1. Mount outside antenna (mounting kit with stucco screws provided)

2. Using CM400 cable, connect the dome antenna to the side of amplifier marked OUTSIDE

3. Mount dome antenna on the ceiling, 

4. Mount amplifier as recommended in user guide

5. Using CM400 cable, connect the dome antenna to the side of amplifier marked INSIDE

6. Connect the power cord.

7. Turn on the booster’s power switch. The LED light will glow, indicating that the booster is ready to use.

8. Included are two attenuators, a 5dB attenuator and 10dB attenuator, which fit to the outdoor amplifier connector at installation. Ideally, the outdoor and indoor antennas will have 70 ft. straight-line separation. If you can only attain 60 ft. of separation, use the 5dB attenuator. If you can only only attain 50 ft. of antenna separation, use the 10dB attenuator. Any questions, email our tech support dept. at support@cellphone-mate.com or call 1-888-365-6283.