CM2020-68 | 3G Enterprise In Building Cellphone Amplifier

68dB Cellular / 68dB PCS | boost signal for buildings up to 20,000 sq. ft.

Click to Enlarge

  • Linear design
  • Reconfigurable, dual band, fits any size
  • 68dB Avg. Gain,73 Max. Gain
  • Manually adjustable at 1 dB increments
  • Features Automatic Shutdown to prevent overload
  • Supports multiple users
  • Uplink/Downlink Oscillation detection (individual LEDs)

The CM2020 68dB amplifier is the most powerful linear dual-band amplifier on the market today and extends cellular services in poor coverage zones where the signal is weak due to topography, building materials or structural design. This full-featured amplifier includes adjustable gain control and automatic shutdown for maximum flexibility. Ideal for low signal and/or large coverage areas. Covers up to 20,000 square feet. Supports multiple simultaneous callers using different carriers.



Package includes:

    ▪ CM2020 68dB amplifier

    ▪ AC power supply

    ▪ User manual

    ▪ Velcro and screw mounting kit


*Outdoor and indoor antenna and 2 cables are required for installation (purchased separately).


 

Frequency Uplink: 824-849/1850-1910 Mhz; Downlink : 869-894/1930-1990Mhz
Average Gain 68dB Cellullar / 68dB PCS
Maximum Gain 75dB
VSWR ≤2:0
Standard Supported CDMA, GSM, UMTS, WCDMA, EDGE, EVDO and all other standard cell phone networks
AC Power Transformer Input AC110V,60Hz; Output DC 5-15V
DC Power 9V to 20V
Maximum RF Output Power 27 dBm with Linearity; 3Watt EIRP with 230W antenna
Noise Figure 5dB
Cable LMR400 or CM400 recommended
RF connectors N Female connectors on both ends
Power Consumption <40W
Dimensions 10.5” x 7.5” x 2”
Weight 10 lbs
VSWR <2:1

Note: Our boosters and amplifiers cannot transmit cell signals without an outside and inside antenna connected by a cable.

We strongly recommend these antennas and cables as accessories for our boosters and amplifiers.

However, the number of antennas, length of cable, or connectors needed can vary according to the size and make of the structure, lack of signal strength, or where the structure resides. Or you can contact us or our reseller to find out what you need.


CM100-L outside antenna

CM100-L


Full Band Outside Fiber Antenna

CM222W


Full Band Inside Dome Antenna

CM400


Ultra-Low-Loss Coaxial Cable

splitters

CM-WS(Option)


Full Band 2,3 or 4 Way Splitters

The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower through the outside antenna.

 

Steps

1. Mount outside antenna (mounting kit with stucco screws provided)

 

2. Using CM400 cable, connect the dome antenna to the side of amplifier marked OUTSIDE

 

3. Mount dome antenna on the ceiling,

 

4. Using CM400 cable, connect the dome antenna to the side of amplifier marked INSIDE

 

5. Connect the Power Cord (make sure the booster’s power switch is in the OFF position).

 

6. Turn on the booster’s power switch. The LED light will glow, indicating that the booster is ready to use.

 

7. Adjust dipswitches per the user manual’s instructions for ideal reception

 

Where to Buy

New Products
Boosters & Kits
Antennas
Other Accessories
Support
Tell a Friend
Contact Us