Note: Our boosters and amplifiers cannot transmit cell signals without an outside and inside antenna connected by a cable.
We strongly recommend these antennas and cables as accessories for our boosters and amplifiers.
However, the number of antennas, length of cable, or connectors needed can vary according to the size and make of the structure, lack of signal strength, or where the structure resides. Or you can contact us or our reseller to find out what you need.
|
|
|
|
|
CM288W
Full Band Outside Fiber Antenna
|
CM222W
Full Band Inside Dome Antenna
|
CM400
Ultra-Low-Loss Coaxial Cable
|
|
|
|
CM-WS(Option)
Full Band 2,3 or 4 Way Splitters
|
The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower through the outside antenna.
Steps
1. Mount outside antenna (mounting kit with stucco screws provided)
2. Using CM400 cable, connect the dome antenna to the side of booster marked OUTSIDE
3. Mount dome antenna on the ceiling,
4. Using CM400 cable, connect the dome antenna to the side of amplifier marked INSIDE
5. Connect the Power Cord (make sure the booster’s power switch is in the OFF position).
6. Turn on the booster’s power switch. The LED light will glow, indicating that the booster is ready to use.
7. Adjust dipswitches per the user manual’s instructions for ideal reception