Designed to blend seamlessly into any environment, the ultra-wideband Ultra Thin antenna is an indoor ceiling-mount dome antenna that transmits and receives signal in a 360° pattern.
Designed to provide maximum coverage throughout indoor areas, the ultra-wideband panel antenna is a high-gain directional antenna that broadcasts signals in a 120° beamwidth.
Designed for maximum performance in rural areas, the ultra-wideband Yagi antenna is a directional outdoor antenna with a range of up to 30 miles for the most remote signal booster applications.
Designed for maximum flexibility with multiple carriers and cell towers in most environments, the ultra-wideband omni antenna is an outdoor antenna that broadcasts in a 360° pattern.
Designed for trucks, work vans, RVs, and fleet vehicles, the OTR truck antenna comes equipped with a strong base and mirror mount that can hold up in the harshest road conditions.
Wide Band 3.3” Non-Magnetic Option exterior omni antenna with ¾” hole mounting base with 17 ft cable and FME-Female connector.
Wide band interior omni-directional whip antenna with FME-Female connector for use with SureCall vehicle and RV cell phone signal boosters.
Wide band interior patch antenna with FME-Female connector designed for use with SureCall vehicle and RV cell phone signal boosters.
Wide band 3.8" magnet-mount exterior roof antenna for vehicles with FME-Female connector and attached 12.5 ft cable.
Designed for top performance in rural areas, the SC-200W-58 exterior vehicle antenna helps improve cell signal inside any car, truck, van, or SUV when paired with a vehicle signal booster.
Designed to blend seamlessly into any environment, Ultra Thin™ is a low-profile wide band 4G indoor dome antenna for SureCall cell phone signal boosters.
Wide band omni-directional 50 ohm ceiling-mount 4G antenna designed for use with SureCall in-building cell phone signal boosters.
Wide band directional 50 ohm wall-mount 4G antenna designed for use with SureCall in-building cell phone signal boosters.
Wide band omni-directional 50 Ohm 4G antenna with N-Female connector designed for use with SureCall in-building cell phone signal boosters.
Wide band high-gain directional 50 Ohm 4G LTE antenna with N-Female connector designed for SureCall in-building cell phone signal boosters.
Wide band omni-directional indoor 4G whip antenna with N-Male connector for use with SureCall in-building cell phone signal boosters.
Perfect for offices or apartments the Signal Catcher Antenna™ can be mounted indoors in a window, eliminating the need for a roof-mount antenna.
SureCall’s bi-directional splitters enable 2 to 4 inside antennas to be supported from a single amplifier and distribute equal amounts of signal to similarly sized areas.
Splitters allow 2-4 indoor antennas to be used with one cellular signal booster. Bi-directional splitters distribute equal amounts of signal to similarly sized areas.
Diplexers implement frequency domain multiplexing, which splits high and low frequencies through different channels back into one port.
Couplers, also known as a taps, are used to place multiple broadcast antennas in a long line when installing a cell phone signal booster system.
Couplers, also known as a taps, are used to place multiple broadcast antennas in a long line when installing a cell phone signal booster system.
Protect signal boosters from damaging electrical surges with this 75 ohm surge protector with F-type connectors for SC-RG6 or SC-RG11 cable.
Protect signal boosters from damaging electrical surges with this 50 ohm surge protector with N-type connectors for SC-400 or SC-600 cable.
Quickly measure signal strength, map indoor frequency levels and identify peak antenna alignment for cell phone signal boosters.
Sentry offers seamless off-site adjustments to maximize signal booster performance with the mobile app or web interface.
Cellular Modem with built-in Router enables easy off-site adjustments for SureCall boosters without a wired Internet connection.
Adjustable 20" J-bar outdoor antenna mounting pole for use with SureCall in-building cell phone signal boosters.
Low-loss coaxial cable with F-Male connectors comes in a variety of lengths and can be used indoors or outdoors to connect SureCall cell phone signal boosters with antennas.
Premium low-loss coaxial cable with F-Male connectors comes in two lengths and can be used indoors or outdoors to connect SureCall cell phone signal boosters with antennas.
Low-loss coaxial cable comes in a variety of lengths and can be used indoors or outdoors to connect SureCall cell phone signal boosters with antennas.
Ultra low-loss coaxial cable with N-Male connectors comes in a variety of lengths and can be used indoors or outdoors to connect SureCall cell phone signal boosters with antennas.
Plenum-rated SC-400 ultra low-loss fire rated coaxial cable with N-Male connectors comes in a variety of lengths and can be used inside plenum ceilings to connect SureCall boosters with antennas.
Lowest-loss coaxial cable available in a 1,000 ft spool can be used indoors or outdoors to connect SureCall cell phone signal boosters with antennas.
Half inch 1/2" plenum-rated copper coaxial cable. Ultra low loss. Available in 1000 ft spools, connectors not included. Designed for use inside plenum ceilings.
Half inch 1/2" armored plenum-rated copper coaxial cable for applications that require mechanical protection. Ultra low loss. Available in 1000 ft spools, connectors not included.
All-in-one combination prep and stripping tool for SC-400 coaxial cable. Use this handy tool to quickly trim coax cable to proper conductor length and braid exposure length.
All-in-one combination prep and stripping tool for SC-600 coaxial cable. Use this handy tool to quickly trim coax cable to proper conductor length and braid exposure length.
All-in-one combination prep and stripping tool for 1/2" plenum-rated coaxial cable. Use this handy tool to quickly trim coax cable to proper length.
Commercial-grade cable crimper with multiple cavity sizes secures connectors to SC-400 coaxial cable. Attach the N-Male crimp connector (SC-CN-09) to SC-400 cable with this handy tool.
Commercial-grade cable crimper secures crimp connectors to SC-600 coaxial cable. Attach the N-Male crimp connector (SC-CN-16) to SC-600 cable with this handy tool.
Wide band omni-directional 75 Ohm 4G antenna with F-Female connector designed for use with SureCall in-building cell phone signal boosters.
Wide band high-gain directional 75 Ohm 4G antenna with F-Female connector designed for SureCall in-building cell phone signal boosters.
Connect attenuators in between the signal booster and the outside antenna cable to automatically reduce the signal strength by 5, 10 or 20 dB.
N-Female to N-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to SMA-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to FME-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to FME-Male connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to SMA-Male connector. Adapter piece joins components of SureCall cell phone signal booster systems.
SMA-Male to FME-Male connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Female to SMA-Male cable connector. Adapter cable connects directly to SureCall RF Signal Meter.
SMA-Male to FME-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male crimp connector. Adapter piece for SC-400 cable installed with SureCall cell phone signal booster systems.
N-Female to FME-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Female to FME-Male connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to N-Male connector. Adapter piece joins components of SureCall cell phone signal booster systems.
FME-Female to SC-240 cable crimp connector. Adapter piece joins components of SureCall cell phone signal booster systems.
FME-Male to SC-240 cable crimp connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to SC-240 cable crimp connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male crimp connector for SC-600 cable. Adapter piece for SC-600-1000 coaxial cable. For use with SureCall cell phone signal booster systems.
FME-Female to SMA-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to F-Male connector. Adapter piece joins components of SureCall cell phone signal booster systems.
F-Female to F-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male to F-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
SMA-Male to MMCX-Male with 24" connector cable. Adapter piece joins components of SureCall cell phone signal booster systems.
F-Male to N-Female connector. Adapter piece joins components of SureCall cell phone signal booster systems.
N-Male Connector for 1/2" Plenum-Rated Coaxial Cable. Designed for SureCall public safety solutions and commercial cell phone signal booster systems.
Permanently wire your vehicle booster directly to the vehicle ignition or battery with this 12V hardwiring power supply option.
Power adapter for Fusion4Home and FlexPro in-building signal boosters. Also compatible with the Fusion2Go line of vehicle signal boosters.
12V 5A power adapter for SureCall vehicle cell phone signal boosters, including the Fusion2Go 3.0, Fusion2Go 2.0, Fusion2Go and Flex2Go.
5V 3A white power adapter for SureCall in-building cell phone signal boosters, including the EZ 4G, Flare and Flare 3.0.
12V 3A power adapter for SureCall in-building cell phone signal boosters, including the Fusion5s, Fusion5X, Fusion7.
19V 4.7A power adapter for SureCall in-building cell phone signal boosters, including the Force5 2.0, Force5, Force5 Industrial and Force7 Industrial.
6V 2A power adapter for SureCall M2M cellular signal boosters.
5V 1A power adapter for the SureCall RF Signal Meter, part # SC-METER-01.