Boosts Cell Signal On:
“[After installation] Everywhere within my house I had full service, and I maintained 3 and 4G the whole time... living in a rural area in almost the middle of nowhere this thing is a must have when service is spotty. Plug this in and set it up, and it does wonders.”
– Brooke K, Flare Customer
Significantly Improve your cell phone signal for all US carriers inside any home, cabin, small building or office up to 3,500 square feet. Flare 3.0 features 2XP technology which doubles uplink transmission power to connect users with reliable call, text, and 4G LTE data coverage in the weakest signal environments.
Flare 3.0 is trusted by thousands of customers across the US for its huge boosting power in a compact, attractive packaging. It comes kitted with a high-power outdoor Yagi directional antenna and a booster with an omni-directional antenna all in one attractive housing that creates a 'null zone' allowing it to provide more coverage than other traditional booster designs. Together with the increased uplink power and upgraded antenna pack the Flare 3.0 provides 8X more connecting power for homes and offices in the most challenging signal locations.
Works with all North American carriers
Reduces missed and dropped calls and increases 4G LTE data speeds
2XP technology delivers 2x uplink power for best performance in remote areas
Most powerful outdoor antenna keeps you connected in the weakest signal environments
Supports multiple simultaneous users
Compatible with all cellular devices, including hotspots, while extending their battery life
5G Phone Compatible - Boosts voice and 4G LTE data signals on 5G phones and devices
Assembled and tested in the USA
|Uplink Frequency Range (MHz):||698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)|
|Downlink Frequency Range (MHz):||728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)|
|Donor/Server Port Impedance:||75 Ohm / 50 Ohm|
|Maximum Gain:||72 dB|
|Noise Figure:||7 dB|
|Supported Standards:||CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE and all cellular standards|
|AC Input:||Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A|
|Maximum Output Power:||1 Watt EIRP|
|Cable:||RG-6 (50 ft)|
|Dimensions:||5.125" × 7.25" × 5.625"|
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.